6 PROGRAM CHASING LED OR INCANDESCENT LAMP DRIVER
This versatile, low voltage, driving circuit features 6 switch-selected, programmed chaser sequences. Four LED indicators monitor each power output. The rate at which each sequence progresses may be adjusted by using the on-board potentiometer.
Sequence 1. The outputs are stepped through turning ON and OFF in ascending order from 1 to 4, and then stepped in descending order through output 4 to 1, then all outputs are turned ON for one step period and then turn OFF before repeating the sequence. Sequence 2. Outputs are turned ON and OFF in ascending order 1 to 4 and then all outputs are turned on for one step period, then the sequence will repeats. Sequence 3. Outputs 1 and 3 are alternately flashed with outputs 2 and 4. Sequence 4. Outputs are stepped On and OFF through from 1 to 4 then back down to 1 and the pattern is repeated. Sequence 5. Outputs step through from 1 to 4 sequentially and then back down to 1. The outputs are then turned OFF for one step period before output 1 turns on and then the sequence will repeats. Sequence 6. The outputs are repeatedly stepped through from 1 to 4 in ascending order.