MB107

Attribute:

4WD MICROBOT CONTROLLED BY MOBILE PHONE (BLUETOOTH)

Share

     This robot is controlled wirelessly by using a Bluetooth signal as the medium of operation. The advantage of Bluetooth is that it consumes less power than wireless WiFi and is also popular when communicating with mobile phones. Besides that, programming and app control work is also easier than the WiFi system. Therefore, it is very suitable for those who are starting to learn wireless. If JDY33 was chosen as the Bluetooth module because it communicates with a wide variety of devices such as computers, Android mobile phones and IOS systems. The Bluetooth version is 3.0 SPP + BLE4.2 and operates at as frequency at 2.4GHz. SPP transmission speed is up to 16K bytes/s and BLE type, up to 4 bytes/s. Transmission distance up to 20 meters (in open air), maximum transmit power 6db, and receiving sensitivity -96dbm.
     Nano V3.0 with the microcontroller IC was selected as a board to control the operation. It has 32KB SRAM 2KB EEPROM 1KB flash memory. The board also has a CH340 IC for converting the USB to UART signal to be used to connect to the computer for loading the driver that we wrote. Users can write programs through the Arduino IDE program. With the aforementioned features, it can eventually be developed to operate via the Internet or as we call the Internet of Things or IoT. Regarding the programming of the drivers, users also learn about mechanics such as the operation of gear motors, learn how to create applications to control robots and learn how to operate electronic circuits.

Technical data

  • Power supply : 6VDC.
  • Electric current consumption : 500mA.
  • Applications can be used on mobile phone to control robot via Bluetooth.
  • Use JDY33 bluetooth module to connect signal.
  • Applications made available on ANDROID mobile phones up to version 10.
  • IC board dimension : 2.56 in x 2.76 in.
  • Body dimension (WxLxH) : 130 x 190 x 100 mm.
  • Weight (batteries not included) : 390g.
  • Use a 4WD drive system.
  • The robot body uses Epoxy PCB.
  • Use all 4 motor gearboxs.
  • Features of motor gearboxs used :
    1.Voltage size: 3-6VDC, 120mA@6VDC (without load).
    2.Maximum speed of motor gearbox (without load) : 120-240rpm/min.
    3.Gear Ratio : 1:48.

Download Manual Click Here

 

 

 

Related Product

This website uses cookies for best user experience, to find out more you can go to our Privacy Policy  and  Cookies Policy